 |
Triple bends on all four sides
for maximum strength. Available in standard 20 gauge
and 18 gauge for heavy duty applications. See capacity
to determine your requirements.
Available in the following standard sizes*
| 09"x24" |
09"x30" |
09"x36" |
09"x42" |
09"x48" |
| 12"x24" |
12"x30" |
12"x36" |
12"x42" |
12"x48" |
| 15"x24" |
15"x30" |
15"x36" |
15"x42" |
15"x48" |
| 18"x24" |
18"x30" |
18"x36" |
18"x42"
|
18"x48" |
| 21"x24" |
21"x30" |
21"x36" |
21"x42" |
21"x48" |
| 24"x24" |
24"x30" |
24"x36" |
24"x42" |
24"x48" |
| |
30"x30"
|
30"x36"
|
30"x42"
|
30"x48" |
| |
|
36"x36"
|
36"x42"
|
36"x48" |
| |
|
|
42"x42" |
42"x48" |
| |
|
|
|
48"x48"
|
|
 |
 |
| SIDE
AND BACK PANELS (Nut/Bolt & Clip Type) |
24 Gauge
Made from cold, rolled steel, side and back panels
are available for all of our units. These panels
are available in both one-piece and multiple-piece
construction.* Laminate and expanded metal sides
are also available. Widths from 9" to 48"
and heights from 37" to 171."**
*one piece panels are available up to 99"
**custom sizes are available upon request
|
 |
24 Gauge
Used to make individual compartments in our shelving
units, our bin dividers are used to store x-rays,
small parts, brochures, mail, etc. Just ask to have
your shelves perforated and tell us the desired
spacing you would like between shelves. Bin dividers
are available with a beaded or hemmed front. For
examples of standard bin divider units take a look
at our bin shelving pages. |
 |
20 Gauge
When fixed dividers won't do, our Magnetic "T"
Dividers are the answer. Easily moved to any shelf,
all corners are rounded for safety. Available in
all sizes to fit your application. |
 |
20 Gauge
Use bin fronts for neat, safe storage. They prevent
items from falling off the front of the shelves.
Available in all heights and widths.
|
 |
12 Gauge
Corner posts measuring 1 ¼" x 1 ¼"
are normally supplied with open and closed type
shelving. 1" x 1 3/4" corner posts are
normally supplied with bin divider type units. Available
up to 22'3" high. Posts can be cut at the factory
to any height desired: e.g. 29" desk height
or 35" workbench height.
|
 |
| ANGLE
SWAY BRACES (Galvanized Steel) |
Used to eliminate back sway braces in order to have
unobstructed front and rear access to our shelving
units. Minimum of 12 needed per unit
(6 in the front & 6 in the rear).
|
 |
| BASES
(NUT & BOLT SHELVING) |
|
 |
Used on open units to prevent swaying. If cross
braces obstruct part of a shelf or unit, angle sway
braces can be used. Order by size of shelf. |
 |
| DIVIDERS,
CLIPS & FASTENERS |
Used to secure bin dividers to perforated shelves.
|
 |
Available in boxes of 100 sets.
Sizes:
¼" x 20 x 5/8"
¼" x 20 x 1"
¼" x 20 x 5/8" w/integrated lock
washer
|
 |
Amscor
has a wide variety of custom colors and textures
to choose from. Visit our
ColorAll™ section to find out more. |
 |
24 gauge
Label holders are great for keeping inventory and
for easily identifying items being stored on our
shelves. They are the full width of the shelf and
1" high to accept standard labels. Label holders
can be either welded to the shelf at the factory
or simply bolted on the shelf during construction. |
 |
#7 Clips (rail steel angles)
1" compression clips (1" offset steel
angles)
1-1/2" compression clips (1-1/2" offset
steel angles)
|
 |
| REINFORCING
ANGLES (Rebars) |
12 Gauge
1" x 1" reinforcing angle used to increase
the weight capacity of each shelf. They can be used
on all sides of the shelf. See the Shelf Class Chart
for more details.
Available in the following sizes:*
9" 12" 15" 18" 21"
24" 30" 36" 42" 48"
*can be custom cut to any length |
 |
20 Gauge
Available in all sizes, sliding dividers are great
when used in applications where easy horizontal
mobility is needed. Top corners are rounded for
safety. |
 |
Used for securing shelving units to the floor.
|
 |
14 Gauge Roll Formed Steel 1" x 1-3/4"
on 1-1/2" centers
3'1" 4'1" 5'1" 6'1" 7'1"
8'1"
9'1" 10'1" 11'1" 12'1" 13'1"
14'1"
*can be custom cut to any length
|
 |
14 Gauge Roll Formed Steel 1" x 1-3/4"
on 1" centers
3'3" 4'3" 5'3" 6'3" 7'3"
8'3"
9'3" 10'3" 11'3" 12'3" 13'3"
14'3"
*can be custom cut to any length
|
 |
24 Gauge
Post covers, also called pilasters, will add a smooth
professional appearance to your shelving units by
concealing all of the holes on the uprights. Available
as corner covers and center covers* with heights
up to 87".
*for side-by-side units
|
 |
20 Gauge
Adding a sanitary base gives a finished look to
your shelving unit along with preventing dust and
small items from getting under the unit. They are
available in all heights and widths.
|
 |
Self-centering finder bits are tough and durable
and great for speeding up assembly time when building
our shelving units.
|
|
12 Gauge Rail Steel 1-1/4" x 1-1/4" on
1" centers
Available in the following standard lengths*
3'3" 4'3" 5'3" 6'3" 7'3"
8'3"
9'3" 10'3" 11'3" 12'3" 13'3"
14'3"
*can be custom cut to any length
|
|
Used to secure shelving units to a sheetrock wall.
¼" x 20 x 3"
|
|
Used to connect two uprights together (both rail
steel and offsets).
|
|
Used to hold and tighten the "square nut"
when assembling shelving units.
|
|
|
|
